Ultimate 10-200
   HOME

TheInfoList



OR:

The Ultimate 10-200 is a Canadian
homebuilt Homebuilt machines are machines built outside of specialised workshops or factories. This can include different things such as kit cars or homebuilt computers, but normally it pertains to homebuilt aircraft, also known as amateur-built aircraft or ...
aerobatic Aerobatics is the practice of flying maneuvers involving aircraft attitudes that are not used in conventional passenger-carrying flights. The term is a portmanteau of "aerial" and "acrobatics". Aerobatics are performed in aeroplanes and glid ...
biplane A biplane is a fixed-wing aircraft with two main wings stacked one above the other. The first powered, controlled aeroplane to fly, the Wright Flyer, used a biplane wing arrangement, as did many aircraft in the early years of aviation. While ...
that was designed produced by Streamline Welding of
Hamilton, Ontario Hamilton is a port city in the Canadian province of Ontario. Hamilton has a population of 569,353, and its census metropolitan area, which includes Burlington and Grimsby, has a population of 785,184. The city is approximately southwest of T ...
, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition'', page 264. BAI Communications, 15 July 1998.


Design and development

The aircraft started out as a replacement set of wings for the
Pitts Special The Pitts Special (company designations S-1 and S-2) is a series of light aerobatic biplanes designed by Curtis Pitts. It has accumulated many competition wins since its first flight in 1944. The Pitts biplanes dominated world ae ...
and eventually a new fuselage was designed to go with the wing set. The resulting aircraft features a
strut-braced In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...
biplane layout, with cabane struts,
interplane struts In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...
and
flying wires In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...
, a single-seat, enclosed cockpit under a
bubble canopy A bubble canopy is an aircraft canopy constructed without bracing, for the purpose of providing a wider unobstructed field of view to the pilot, often providing 360° all-round visibility. The designs of bubble canopies can drastically vary; s ...
, fixed
conventional landing gear Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Term ...
with
wheel pants An aircraft fairing is a structure whose primary function is to produce a smooth outline and reduce drag.Crane, Dale: ''Dictionary of Aeronautical Terms, Third Edition'', page 206. Aviation Supplies & Academics Inc, Newcastle Washington, 1997. ...
and a single engine in
tractor configuration In aviation, the term tractor configuration refers to an aircraft constructed in the standard configuration with its engine mounted with the propeller in front of it so that the aircraft is "pulled" through the air. Oppositely, the pusher c ...
. The aircraft is made from metal with its flying surfaces covered in doped
aircraft fabric Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as are ...
. Its wing span is only . The acceptable power range varies by each model. Standard equipment includes an inverted fuel system and rear-hinged canopy. Operational g loads are +7 and -5 g. The aircraft has a roll rate of 360 degrees per second. The 10-200 version has a typical empty weight of and a gross weight of , giving a useful load of . With full fuel of the payload for the pilot and baggage is . The standard day, sea level, no wind, take off with a engine is and the landing roll is . The manufacturer estimated the construction time from the supplied kit as 1200 hours.


Operational history

In March 2014 six examples were registered in the United States with the
Federal Aviation Administration The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
, although a total of 12 had been registered at one time. Also in March 2014 two were registered in Canada with
Transport Canada Transport Canada (french: Transports Canada) is the department within the Government of Canada responsible for developing regulations, policies and services of road, rail, marine and air transportation in Canada. It is part of the Transportati ...
.


Variants

;Ultimate 10-180 :Model powered by the
Lycoming O-360 The Lycoming O-360 is a family of four-cylinder, direct-drive, horizontally opposed, air-cooled, piston aircraft engines. Engines in the O-360 series produce between 145 and 225 horsepower (109 to 168 kW), with the basic O-360 produc ...
powerplant ;Ultimate 10-200 :Model powered by the
Lycoming IO-360 The Lycoming O-360 is a family of four-cylinder, direct-drive, horizontally opposed, air-cooled, piston aircraft engines. Engines in the O-360 series produce between 145 and 225 horsepower (109 to 168 kW), with the basic O-360 producing ...
powerplant ;Ultimate 10-300 :Model powered by the
Lycoming IO-540 The Lycoming O-540 is a family of air-cooled six-cylinder, horizontally opposed fixed-wing aircraft and helicopter engines of displacement, manufactured by Lycoming Engines. The engine is a six-cylinder version of the four-cylinder Lycoming ...
powerplant


Specifications (Ultimate 10-200)


See also

*
List of aerobatic aircraft An aerobatic aircraft is an aerodyne (a heavier-than-air aircraft) used in aerobatics, both for flight exhibitions and aerobatic competitions. Most fall into one of two categories, aircraft used for training and by flight demonstration teams, wh ...


References


External links


Photo of an Ultimate 10-200
{{aerobatics
Ultimate Ultimate or Ultimates may refer to: Arts, entertainment, and media Music Albums * ''Ultimate'' (Jolin Tsai album) * ''Ultimate'' (Pet Shop Boys album) *''Ultimate!'', an album by The Yardbirds *''The Ultimate (Bryan Adams Album)'', a compilatio ...
1990s Canadian sport aircraft Single-engined tractor aircraft Biplanes Homebuilt aircraft Aerobatic aircraft